VALVOLINE INC DIV OF ASHLAND OIL INC -- ALL CLIMATE MOTOR OIL SAE 20W50 -- 9150-00F017569
===================== Product Identification ===================== Product ID:ALL CLIMATE MOTOR OIL SAE 20W50 MSDS Date:04/18/1991 FSC:9150 NIIN:00F017569 === Responsible Party === Company Name:VALVOLINE INC DIV OF ASHLAND OIL INC Box:14000 City:LEXINGTON State:KY ZIP:40512 Info Phone Num:(606) 264-7000 Emergency Phone Num:(606) 264-7000 OR (800) 274-5263 CAGE:FO893 === Contractor Identification === Company Name:VALVOLINE INC DIV OF ASHLAND OIL INC Box:14000 City:LEXINGTON State:KY ZIP:40512 Phone:(606) 264-7000 CAGE:FO893 Company Name:VALVOLINE OIL CO Address:3499 BLAZER PKY Box:14000 City:LEXINGTON State:KY ZIP:40512 Country:US Phone:606-357-7206 / 800-274-5263 CAGE:72527 ============= Composition/Information on Ingredients ============= Ingred Name:DETERGENT/DISPERSANT ENGINE OIL PACKAGE Fraction by Wt: 3.7-7.5% Ingred Name:PETROLEUM LUBE OIL Fraction by Wt: 70-85% OSHA PEL:5 MG/CUM ACGIH TLV:5 MG/CUM Ingred Name:ZINC COMPOUNDS Fraction by Wt: 1.3-2.5% ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:INHALATION: BREATHING DIFFICULTY. Explanation of Carcinogenicity:NONE Effects of Overexposure:INHALATION: BREATHING DIFFICULTY. ======================= First Aid Measures ======================= First Aid:SKIN: WASH THOROUGHLY W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER. INGESTION: DON'T INDUCE VOMITING. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. KEEP WARM & QUIET. INHALATION: REMOVE TO F RESH AIR. GIVE OXYGEN OR CPR IF NEEDED.OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Flash Point:>400F Extinguishing Media:REGULAR FOAM, CO2, OR DRY CHEMICAL. Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS W/FULL FACEPIECE OPERATED IN THE POSITIVE PRESSURE DEMAND MODE. Unusual Fire/Explosion Hazard:NEVER USE WELDING/CUTTING TORCH ON/NEAR DRUM IT MAY IGNITE EXPLOSIVELY. WATER/FOAM MAY CAUSE FROTHING & BE VIOLENT, IF SPRAYED INTO CONTAINER OF HOT LIQUID. ================== Accidental Release Measures ================== Spill Release Procedures:SMALL: ABSORB ON PAPER/VERMICULITE/FLOOR ABSORBENT OR OTHER ABSORBENT MATERIAL & TRANSFER TO HOOD. LARGE: EVACUATE AREA. STOP AT SOURCE. PUMP TO SALVAGE TANK. REMAINDER TAKE UP ON SAND/CLAY/EARTH/FLOO R ABSORBENT & SHOVEL INTO CONTAINERS. ====================== Handling and Storage ====================== Handling and Storage Precautions:CONTAINERS OF THIS PRODUCT MAY BE HAZARDOUS WHEN EMPTIED. SINCE THEY RETAIN PRODUCT RESIDUES (VAPOR/LIQUID/SOLID), OBSERVE ALL HAZARD PRECAUTIONS. Other Precautions:DON'T TRANSFER TO UNLABELED CONTAINER OR USE CUTTING/WELDING TORCH ON THIS CONTAINER. FOR INDUSTRIAL USE ONLY. AVOID CONTACT W/SKIN. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE. Ventilation:NOT REQUIRED UNDER NORMAL CONDITIONS OF USE. Protective Gloves:AS REQUIRED Eye Protection:AS REQUIRED Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS. Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE. Supplemental Safety and Health ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:>425F Vapor Density:>AIR Spec Gravity:0.890 Evaporation Rate & Reference:SLOWER THAN ETHER Appearance and Odor:LIQUID, HOMOGENIOUS SOLUTION. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZING AGENTS Hazardous Decomposition Products:TOXIC MATERIALS SUCH AS CO2, CO, & VARIOUS HYDROCARBONS. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, & FEDERAL REGULATIONS. PREVENT RUN-OFF TO SEWERS, STREAMS OR OTHER BODIES OF WATER. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.