PERMATEX INDUSTRIAL DIV OF LOCTITE CORP -- 80636 CLEAR RTV SILICONE ADH SLNT  -- 8030-00F026745
<pre>=====================  Product Identification  =====================

Product ID:80636 CLEAR RTV SILICONE ADH SLNT
MSDS Date:03/17/1995
FSC:8030
NIIN:00F026745
=== Responsible Party ===
Company Name:PERMATEX INDUSTRIAL DIV OF LOCTITE CORP
Address:705 NORTH MOUNTAIN ROAD
Box:11915
City:NEWINGTON
State:CT
ZIP:06111-1411
Country:US
Info Phone Num:203-571-5100/203-527-5211
Emergency Phone Num:800-641-7376/203-571-5100
Preparer's Name:STEPHEN REPETTO
CAGE:62377
=== Contractor Identification ===
Company Name:PERMATEX INDUSTRIAL
Address:HARTFORD SQUARE N 10 COLUMBUS BLVD
Box:City:HARTFORD
State:CT
ZIP:06106
Country:US
Phone:877-376-2839
CAGE:62377

=============  Composition/Information on Ingredients  =============

Ingred Name:DIMETHYL POLYSILOXANE (MONOMER: DIMETHYL SILOXANE),
    SILICONE FLUID, DOW CORNING 200, POLYMETHYLSILOXANE
CAS:63148-62-9
RTECS #:JT6484500
Fraction by Wt: 85-90%

Ingred Name:SILICA, AMORPHOUS FUMED (IARC CARCINOGEN - GROUP 3)  *95-4*
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 5-10%
OSHA PEL:0.1 MG/CUM
ACGIH TLV:0.1 MG/CUM

Ingred Name:ETHYLTRIACETOXYSILANE   *95-4*
CAS:17689-77-9
Fraction by Wt: 1-5%

Ingred Name:METHYLTRIACETOXYSILANE, ALKYL TRIACETOXY SILANE
CAS:4253-34-3
RTECS #:VV4500000
Fraction by Wt: 1--5%

Ingred Name:ACETIC ACID (GLACIAL)
CAS:64-19-7
RTECS #:AF1225000
Fraction by Wt: 3-5%
OSHA PEL:25 MG/CUM
ACGIH TLV:25 MG/CUM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50(LAB ANIMAL): 2060 MG/KG
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATES. ACETIC ACID
    PRODUCED DURING CURE IRRITATES EYES, NOSE & THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:METHYLTRIACETOXYSILANE: EYE, SKIN &
    PULMONARY DISORDERS.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DON'T INDUCE VOMITING. KEEP CALM. INHALATION:
    REMOVE TO FRESH AIR. TREAT SYMPTOMATICALLY. SKIN: WIPE OFF PASTE
    W/PAPER TOWEL/CLOTH. WASH AREA W/SOAP & WATER. EYES: FLUSH 15 MINS
    W/WATER. OB TAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:>200F
Lower Limits:4
Upper Limits:19.9
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE/SCRAPE UP MATERIAL. MAINTAIN GOOD
    VENTILATION. PLACE SCRAP MATERIAL IN A WELL VENTILATED PLACE &
    ALLOW TO CURE TO RUBBER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A DRY AREA < 90F. KEEP
    CONTAINER CLOSED WHEN NOT IN USE.
Other Precautions:AVOID BREATHING VAPOR. AVOID EYE/SKIN CONTACT. DON'T
    WEAR CONTACT LENSES WHILE APPLYING MATERIAL. VAPOR MAY BE TRAPPED
    UNDER LENSES.

=============  Exposure Controls/Personal Protection  =============

Ventilation:LOCAL EXHAUST
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES/GOGGLES
Supplemental Safety and Health
EXPLOSIVE LIMITS ARE FOR ACETIC ACID.

==================  Physical/Chemical Properties  ==================

Vapor Pres:10
Spec Gravity:1.01
VOC Pounds/Gallon:47
Solubility in Water:POLYMERIZED
Appearance and Odor:CLEAR PASTE W/SHARP, IRRITATING ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:MOISTURE
Hazardous Decomposition Products:ACETIC ACID, FORMALDEHYDE, SILICA FUME

====================  Disposal Considerations  ====================

Waste Disposal Methods:CURED RUBBER SCRAP CAN BE INCINERATED,
    IAW/FEDERAL, STATE & LOCAL REGULATIONS.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.