BENNETTE PAINT MFG CO INC -- PRODUCTION LATEX WHITE, 080101  -- 8010-00N015146
<pre>=====================  Product Identification  =====================

Product ID:PRODUCTION LATEX WHITE, 080101
MSDS Date:10/15/1993
FSC:8010
NIIN:00N015146
=== Responsible Party ===
Company Name:BENNETTE PAINT MFG CO INC
Address:401 INDUSTRY DR
City:HAMPTON
State:VA
ZIP:23661
Country:US
Info Phone Num:804-838-7777
Emergency Phone Num:804-838-7777
CAGE:3Y107
=== Contractor Identification ===
Company Name:BENNETTE PAINT MANUFACTURING CO INC
Address:401 INDUSTRY DR
Box:City:HAMPTON
State:VA
ZIP:23661
Country:US
Phone:804-838-7777
CAGE:3Y107

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL (SARA 313) (CERCLA)   VP: 0.1 @ 68F
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: <5%
OSHA PEL:N/K 
ACGIH TLV:50 PPM, VAPOR, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

Ingred Name:VOLATILE ORGANIC COMPOUND: 0.70 LB/GAL (83 G/L)
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESIDUAL VAPORS MAY BE
    IRRITATING TO EYES, SKIN, MUCOUS MEMBRANES, RESPIRATORY TRACT AND
    MAY PRODUCE HEADACHE AND NAUSEA IN POORLY VENTILATED AREAS. EYES:
    DIRECT CONTACT WITH PAINT MAY RES ULT IN EYE IRRITATION. SKIN:
    PROLONGED OR REPEATED CONTACT WITH PAINT MAY CAUSE SKIN IRRITATION.
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CHRONIC: PROLONGED OR REPEATED
    CONTACT WITH PAINT MAY CAUSE SKIN IRRITATION.
Medical Cond Aggravated by Exposure:ALLERGY OR SKIN SENSITIZATION.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH SKIN THOROUGHLY WITH SOAP AND WARM WATER. EYES:
    IMMEDIATELY FLUSH EYES WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
    AND CONSULT MD. INGESTION: GIVE TWO (2) GLASSES OF WATER AND CALL
    MD. INH ALATION: MOVE TO FRESH AIR.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:200F,93C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
    WATER MAY BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILDUP & POSS
    EXPLO WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
    EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:RECOVER LIQUID WITH ABSORBENT MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID
    PROLONGED CONTACT WITH SKIN.
Other Precautions:EMPTY CONTAINER WARNING: IN ACCORDANCE WITH LOCAL,
    STATE AND FEDERAL REGULATIONS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN CONFINED AREAS AND WHEN SPRAYING, USE
    NIOSH/MSHA APPROVED RESPIRATORY DEVICE.
Ventilation:PROPER VENTILATION.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:WASH HANDS AFTER USE, BEFORE EATING OR USING
    WASHROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Vapor Pres:SEE ING
Vapor Density:HVR/AIR
Spec Gravity:1.3 (H*2O=1)
Evaporation Rate &amp; Reference:SLOWER/ETHER (BUAC=1)
Solubility in Water:SOLUBLE
Appearance and Odor:VISCOUS LIQUID; MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME TEMPERATURES IN CLOSED CONTAINERS.
Hazardous Decomposition Products:NONE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.