LEHN & FINK PRODUCTS COMPANY -- LYSOL (R) BRAND DISINFECTANT SPRAY - -- 7930-00B120071
=====================  Product Identification  =====================

Product ID:LYSOL (R) BRAND DISINFECTANT SPRAY -
MSDS Date:04/09/1991
FSC:7930
NIIN:00B120071
=== Responsible Party ===
Company Name:LEHN & FINK PRODUCTS COMPANY
Address:225 SUMMIT AVE
City:MONTVALE
State:NJ
ZIP:07645-1523
Country:US
Info Phone Num:201-573-5700 (24 HRS)
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:DO879
=== Contractor Identification ===
Company Name:LEHN & FINK PRODUCTS COMANY
Address:225 SUMMIT AVE
City:MONTVALE
State:NJ
ZIP:07645-1523
Country:US
Phone:201-573-5700 (24 HRS)
CAGE:DO879
Company Name:RECKITT & COLMAN INC
Address:225 SUMMIT AVE
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-5700
CAGE:73820

=============  Composition/Information on Ingredients  =============

Ingred Name:CARBON DIOXIDE
CAS:124-38-9
RTECS #:FF6400000
Fraction by Wt: 4.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93

Ingred Name:ETHYL ALCOHOL (ETHANOL)
CAS:64-17-5
RTECS #:KQ6300000
Fraction by Wt: 79%
Other REC Limits:NONE SPECIFIED
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM; 9192

Ingred Name:2-PHENYLPHENOL  (SARA III)
CAS:90-43-7
RTECS #:DV5775000
Fraction by Wt: .1%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
    LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:SUSCEPTIBLE INDIVIDUALS MAY EXPERIENCE
    DIZZINESS, DROWSINESS, NAUSEA AND VOMITING IF EXPOSED TO EXTREMELY
    HIGH CONCENTRATIONS OF THE VAPORS. MAY CAUSE MILD TEMPORARY EYE
    IRRITATION.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF
    RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.

=======================  First Aid Measures  =======================

First Aid:EYES: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MIN.,
    REMOVE CONTACT LENSES TO INSURE A THOROUGH FLUSH. IF IRRITATION
    PERSISTS, GET MEDICAL ATTENTION. SKIN: NOT EXPECTED TO BE A
    PROBLEM. INHALATION : IF REQUIRED, REMOVE TO FRESH AIR. INGESTION:
    VERY UNLIKELY. ADMINISTER WATER TO DILUTE THE INGESTED MATERIAL.
    CONSULT PHYSICIAN. DO NOT GIVE LIQUIDS TO AN UNCONSCIOUSNESS
    PERSON.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:70.0F,21.1C
Extinguishing Media:WATER SPRAY, FOAM, DRY CHEMICAL OR CARBON DIOXIDE.
    USE MEDIA SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR SCBA AND PROTECTIVE EQUIPMENT FOR
    FIGHTING A TYPICAL CHEMICAL FIRE. MOVE CONTAINERS AWAY FROM FIRE IF
    POSSIBLE AND SAFE TO DO SO.
Unusual Fire/Explosion Hazard:CONTENTS UNDER PRESSURE. DO NOT USE NEAR
    HEAT, SPARK OR OPEN FLAME. DO NOT PUNCTURE OR INCINERATE CONTAINER.
    EXPOSURE TO TEMP. ABOVE 120F MAY CAUSE BURSTING.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR PROTECTIVE EQUIPMENT, ELIMINATE SOURCES
    OF IGNITION, AND VENTILATE AREA AS REQUIRED. ABSORB SMALL SPILL
    WITH INERT MATERIAL OR DIKE TO RETAIN LARGE SPILL. PLACE WASTE IN
    DOT APPROVED CONTAINER FO R DISPOSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY, WELL VENTILATED
    AREA AWAY FROM SOURCES OF IGNITION. KEEP CONTAINER CLOSED WHEN NOT
    IN USE. PROTECT FROM PHYSICAL DAMAGE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE SPECIFIED BY MANUFACTURER.
Eye Protection:NONE SPECIFIED BY MANUFACTURER.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:172F,78C
Vapor Pres:95-105PSIG
Vapor Density:>1
Spec Gravity:0.835 @ 25C
pH:10
Solubility in Water:MISCIBLE
Appearance and Odor:AEROSOL SPRAY CAN

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 120F.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE, AND
    UNIDENTIFIED ORGANIC COMPOUNDS MAY BE FORMED DURING THERMAL
    DECOMPOSITION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.