HEWLETT-PACKARD CO  BOISE DIV -- C3906A EP-A TONER CARTRIDGE  -- 6850-01-261-6064
<pre>=====================  Product Identification  =====================

Product ID:C3906A EP-A TONER CARTRIDGE
MSDS Date:01/31/1995
FSC:6850
NIIN:01-261-6064
=== Responsible Party ===
Company Name:HEWLETT-PACKARD CO  BOISE DIV
Address:11311 CHINDEN BLVD
City:BOISE
State:ID
ZIP:83714
Country:US
Info Phone Num:208-396-6000/323-2551
Emergency Phone Num:208-396-6000/323-2551
CAGE:18660
=== Contractor Identification ===
Company Name:BSC INC
Address:411 WAVERLY OAKS ROAD
Box:City:WALTHAM
State:MA
ZIP:02154
Country:US
CAGE:0EC53
Company Name:HEWLETT PACKARD CO
Country:US
Phone:208-323-2987
CAGE:54546
Company Name:HEWLETT-PACKARD CO  BOISE DIV
Address:11311 CHINDEN BLVD
Box:City:BOISE
State:ID
ZIP:83714
Country:US
Phone:208-396-6000
CAGE:18660

=============  Composition/Information on Ingredients  =============

Ingred Name:STYRENE ACRYLATE COPOLYMER,
CAS:25153-46-2
Fraction by Wt: 45-55%

Ingred Name:IRON OXIDE
CAS:1317-61-9
Fraction by Wt: 45-55%
OSHA PEL:10 MG/M3
ACGIH TLV:5 MG/M3

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 (ORAL RAT) IS  >5000 MG/M3
Routes of Entry: Inhalation:NO	Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE IRRITATION. UNLIKELY TO
    CAUSE SKIN IRRITATION. MINIMAL RESPIRATORY TRACT IRRITATION MAY
    OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY TOXIC DUST.
    INGESTION IS NOT APPLICABLE ROUTE OF EN TRY FOR INTENDED USE.
Explanation of Carcinogenicity:MANUFACTURER GAVE NO INFORMATION ABOUT
    CARCINOGENICITY. HMIS DOES NOT EXPECT IT TO BE CARCINOGENIC.
Effects of Overexposure:EYES-IRRITATION. INHALED-MINIMAL RESPIRATORY
    IRRITATION.
Medical Cond Aggravated by Exposure:MFR GAVE NO INFORMATION ON MSDS.

=======================  First Aid Measures  =======================

First Aid:INGESTED-DILUTE STOMACH CONTENTS WITH SEVERAL GLASSES OF
    WATER. INHALED-REMOVE VICTIM TO FRESH AIR. EYES-FLUSH WITH RUNNING
    WATER FOR AT LEAST 15 MINUTES. SKIN-WASH WITH SOAP & WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER, DRY CHEMICAL, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TONER MATERIAL LIKE MOST ORGANIC MATERIAL
    IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NO TONER SPILALGE OCCURS IN NORMAL HADNLING OR
    OPRATIONS. IF IT SHOULD OCCUR, AVOID INHALTION OF DUST. SWEEP
    MATERIAL ONTO PAPER AND CAREFULLY TRANSFER TO A SCALABLE WASTE 
    CONTAINER.
Neutralizing Agent:MFR GAVE NO INFORMATION ON MSDS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
    FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED UNDER INTENDED USE. GOOD GENERAL
    VENTILATIUON SHOULD BE SUFFICIENT UNDER INTENDED USE.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT
Protective Gloves:NONE REQUIRED UNDER INTENDED USE.
Eye Protection:NONE REQUIRED UNDER INTENDED USE.
Other Protective Equipment:NONE REQUIRED UNDER INTENDED USE.
Work Hygienic Practices:DLA-HMIS FOCAL POINT: USE GOOD INDUSTRIAL
    HYGIENE PRACTICE. AVOID UNNECESSARY CONTACT. WASH THOROUGHLY AFTER
    HANDLING.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:N1
NRC/State Lic Num:NONE
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Spec Gravity:NOT APPLICABLE1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK FINE POWDER, SLIGHT PLASTIC ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:MFR GAVE NO INFORMATION ON MSDS.
Hazardous Decomposition Products:COMBUSTION WILL PRODUCE CARBON DIOXIDE
    & CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:THIS PRODUCT IS CONTRUCTED FROM	PLATSICS AND
    METALS. THE WASTE TONER COULD BE CONSIDERED AS PLASTIC WASTE.
    DISPOSAL SHOULD BE SUBJECT TO LOCAL, STATE AND FEDERAL REGULATIONS.

 ======================================================================
 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.