ARMSTRONG WORLD INDUSTRIES INC -- S-700 FLOOR TILE ADHESIVE  -- 8040-00N033418
<pre>=====================  Product Identification  =====================

Product ID:S-700 FLOOR TILE ADHESIVE
MSDS Date:07/01/1991
FSC:8040
NIIN:00N033418
=== Responsible Party ===
Company Name:ARMSTRONG WORLD INDUSTRIES INC
Address:313 WEST LIBERTY ST
Box:3001
City:LANCASTER
State:PA
ZIP:17604
Country:US
Info Phone Num:717-396-2328;717-396-2935
Emergency Phone Num:717-396-2328;717-396-2935
CAGE:03938
=== Contractor Identification ===
Company Name:ARMSTRONG WORLD INDUSTRIES,  INC.
Address:313 W. LIBERTY ST.
Box:3209
City:LANCASTER
State:PA
ZIP:17604
Country:US
Phone:717-396-2328; 717-396-2935
CAGE:03938

=============  Composition/Information on Ingredients  =============

Ingred Name:UREA
CAS:57-13-6
RTECS #:YR6250000
Fraction by Wt: 2%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SKIN & EYES: EXCESSIVE SKIN CONTACT
    MAY CAUSE IRRITATION OF SKIN, & RESULT IN DERMATITIS. CONTACT WITH
    EYES WILL CAUSE IRRITATION. INHAL: MAY CAUSE IRRITATION OF
    RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANY MEDICAL CONDITION THAT MAY BE
    AGGRAVATED BY A PULMONARY IRRITANT.

=======================  First Aid Measures  =======================

First Aid:EYES: WASH WITH WATER FOR AT LEAST 15 MINUTES & CONSULT
    PHYSICIAN. SKIN: WASH WITH WATER. INHAL: REMOVE TO FRESH AIR. SEEK
    MEDICAL ATTENTION IF SYMPTOMS PERSIST. INGEST: CALL MD IMMED .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:CO*2, DRY CHEMICAL, HALON, WATER SPRAY.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:CLOSED CONTAINRS IN A FIRE MAY RUPTURE
    DUE TO PRESSURE BUILD-UP; USE WATER TO COOL CONTAINERS TO PREVENT
    THIS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:MOP UP, OR OTHERWISE PICK UP PRODUCT WITH
    ABSORBING MATERIALS. RINSE AREA WITH CLEAN, COLD WATER; THEN DRY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:SHOULD NOT BE REQUIRED. USE NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL AMBIENT VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:LATEX OR RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Appearance and Odor:THIN BLACK PASTE WITH AN ASPHALT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NORMAL PRODUCTS OF COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH ALL FEDERAL, STATE,
    AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.