PERMATEX INDUSTRIAL -- RTV BLACK ADHESIVE SEALANT, 81173  -- 8030-00N058173
<pre>=====================  Product Identification  =====================

Product ID:RTV BLACK ADHESIVE SEALANT, 81173
MSDS Date:10/02/1986
FSC:8030
NIIN:00N058173
=== Responsible Party ===
Company Name:PERMATEX INDUSTRIAL
Address:705 NORTH MOUNTAIN ROAD
Box:11915
City:NEWINGTON
State:CT
ZIP:06111-1411
Country:US
Info Phone Num:203-278-1280
Emergency Phone Num:203-278-1280
Preparer's Name:STEPHAN REPETTO
CAGE:62377
=== Contractor Identification ===
Company Name:PERMATEX INDUSTRIAL
Address:HARTFORD SQUARE N 10 COLUMBUS BLVD
Box:City:HARTFORD
State:CT
ZIP:06106
Country:US
Phone:877-376-2839
CAGE:62377

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYDIMETHYL SILOXANE; (POLY (DIMATHYLSILOXANE))
CAS:9016-00-6
RTECS #:TQ2690000
Fraction by Wt: 80-85%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:POLYACETOXY SILANE
Fraction by Wt: <5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SILICA, CRYSTALLINE-QUARTZ; (SILICON DIOXIDE)
CAS:14808-60-7
RTECS #:VV7330000
Fraction by Wt: 10-15%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:PIGMENT
Fraction by Wt: <5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE AND SKIN IRRI. MODERATE TOXICITY
    BY INGEST. INHAL OF PURE SILICON DIOXIDE DUST HAS BEEN SHOWN TO
    CAUSE ADVERSE PULM EFTS. IT IS OUR BEST TECHNICAL JUDGEMENT THAT,
    W/PROPER PREC, NORM USE OF THIS P ROD POSES NO SUCH HAZ. THESE
    STATEMENTSARE PRESENT ONLY TO COMPLY W/OSHA REGS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:ACETIC ACID LIBERATED DURING CURE IRRITATES
    EYES, NOSE AND THROAT, PROLONGED OR REPEATED CONTACT MAY IRRITATE
    SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:INGEST: DO NOT INDUCE VOMITING. KEEP INDIVIDUAL CALM. OBTAIN
    MEDICAL ATTENTION. INHAL: REMOVE TO FRESH AIR. TREAT
    SYMPTOMATICALLY. SKIN: WIPE FROM SKIN WITH DRY CLOTH. WASH WITH
    SOAP AND WATER. EYES:  FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
    OBTAIN MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:CC
Flash Point:>200F,>93C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS PRODUCTS FORMED BY FIRE OR
    THERMAL DECOMPOSITION: ACETIC ACID, FORMALDEHYDE, SILICA MIST.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE OR SCRAPE UP MATERIAL. MAINTAIN GOOD
    VENTILATION FOR LARGE SPILLS. ALLOW MATERIAL TO CURE TO RUBBER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN DRY AREA BELOW 90F. KEEP
    CONTAINERS CLOSED WHEN NOT IN USE.
Other Precautions:AVOID EYE OR SKIN CONTACT. ACETIC ACID VAPOR RELEASED
    DURING APPLICATION AND CURE. DO NOT WEAR CONTACT LENSES WHILE
    APPLYING MATERIAL. VAPOR MAY BE TRAPPED UNDER LENS. DO NOT PUNCTURE
    CONTAINERS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN .
Ventilation:PROVIDE ADEQUATE VENTILATION FOR PROLONGED USE IN CONFINED
    AREA.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5
Spec Gravity:1.05 @ 60F
Solubility in Water:POLYMERIZED
Appearance and Odor:BLACK PASTE WITH ACETIC ACID ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AIR OR MOISTURE CAUSES POLYMERIZATION
    AND ACETIC ACID VAPORS RELEASED.

====================  Disposal Considerations  ====================

Waste Disposal Methods:LANDFILL OR INCINERATE FOLLOWING EPA AND LOCAL
    REGULATIONS. MATERIAL NOT CONSIDERED A HAZARDOUS WASTE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.